標準號 | 標準名稱 | 主要適用 |
IEC62133:2002/ EN62133:2003 | or portable sealed secondary cells, and for batteries made from them, for use in portable applications 含堿性或非酸性電解液的單體蓄電池(電芯)和蓄電池組:便攜式蓄電芯及使用其制造的電池、便攜應用的安全要求 | 申請CB驗證,必須通過此標準測試 |
IEEE1725:2006 及CTIA認證程序 | IEEE Standard for Rechargeable Batteries for Cellular ephones 用可充電電池標準。 Certification Requirements for Battery System Compliance to IEEE 1725 CTIA符合IEEE1725電池系統的證明要求 | 移動主機用鋰離子電池出貨到北美 |
IEEE1625:2008 | IEEE Standard for Rechargeable Batteries for Multi-Cell Computing Devices 移動計算機用可充電電池標準 | 筆記本電腦電池標準 |
IEC 61960:2003/ EN 61960:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes – secondary lithium cells and batteries for portable applications 含堿性或非酸性電解液的單體蓄電池(電芯)和蓄電池組:便攜式鋰單體蓄電池(電芯)和鋰蓄電池組 | 電性能測試標準。 韓國KPS認證主要測試標準。 |
UN 38.3 -2003 | UN Rec o mmendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Section 38.3 UN關于危險品運輸的建議,手冊及試驗標準,第38.3節 | 鋰電池運輸(空運、海運)必須通過 |
IEC 61959:2004/ EN 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes –Mechanical Test 含堿性或非酸性電解液的單體蓄電池和蓄電池:便攜式密封鋰單體蓄電池和鋰蓄電池的機械試驗 | —— |
JIS C 8714-2007 | Safety tests for portable Lithium Ion secondary cells and batteries for use in portable electronic applications 攜帶型電子設備用攜帶型鋰離子蓄電池的安全測試 | 日本PSE認證必須通過 |
ICAO Doc9284-AN/905 | Technical Instructions on the safe transport of dangerous goods by air 危險物品安全航空運輸技術細則 | 民用航空組織標準 |
UL1642-2007 | Lithium batteries 鋰電池 | 鋰電芯安全標準 |
UL2054-2006 | Household and c o mmercial batteries 家用及商業電池 | 鋰電池安全標準 |
GB/T 18287-2000 | General specification of lithium-ion battery for cellular phone 蜂窩用鋰離子電池總規范 | 國家標準 |
YD1268-2003 | The safety specification and test method for lithium batteries and charger 移動通信手持機鋰電池及充電器的安全要求和試驗方法 | (國內)通信行業標準 |
YD/T 998-1999 | Lithium-ion Battery and charger for cellular phones: Lithium-ion battery 移動通信手持機用鋰離子電源及充電器 | (國內)通信行業標準 |
QB/T 2502-2000 | 鋰離子蓄電池總規范 | (國內)輕工業行業標準 |
由此看來,不管是在國內還是范圍內,鋰離子電池標準的制定或修訂工作都非?;钴S,這也是市場對鋰離子電池安全性能的要求不斷提升的需要。從另一方面講,這也給電池廠商帶來了更加嚴峻的挑戰,要求電池廠商必須不斷提高在設計、生產及檢測過程中的水平。